|
In the main window, select restore mode with “Restore” button at top of screen. |
|
First step of restoration is selection of a .BKI file containing information about backuped drivers.
When a package file is selected DriverBackup! Scans hardware connected to computer and checks all backup files.
For default DriverBackup! selects only drivers that could be useful for hardware devices connected to computer but other drivers can be selected also.
There are two restoration modes:
-Install mode: A particolar device connected to computer needs a driver, so driver is installed for first time.
-Update mode: A particolar device is correctly installed, but driver is older than backuped one. In this case DriverBackup! performs updating of files.
Select desired devices and press “Restore” button.
Click on “Restore” button and DriverBackup! will restore selected devices.
If “Scan for new Plug n Play devices..” checkbox is selected program forces system to update its hardware configuration after restoration process is completed. Probably some drivers require system reboot to work properly.
Selecting “Update driver configuration.”checkbox, program never ask to forcing driver’s update. If update operation fails an error is reported in logging list. |
|
Notice:
If a device has some files missing it is marked as “incompatible” and it can’t be restored. |