Control FPWIN Pro Ver.5.24 trial version

Information you need to know before using the software (Essential reading)

About Control FPWIN Pro Ver.5.24 trial version

The trial version of Control FPWIN Pro differs from the commercial version in the particulars listed below.

  • Using the trial version, the number of program steps that can be created with the application or uploaded from the PLC is limited to as follows;
    FP-e 2.7K 300step
    FP1/FP-M 0.9K 200step
    FP0/FP1/FP-M 2.7K 300step
    FP0/FP1/FP-M 5.0K 400step
    FP0/FP3 10K 500step
    FPΣ 12K 500step
    FP-X/FP2/FP3/FP-C/FP5 16K 500step
    FP5 24K 500step
    FP10/FP10S/FP10SH 30K 500step
    FP-X/FP2 32K 500step
    FP2/FP10/FP10SH 60K 1000step
    FP2SH/FP10SH 120K 1000step

Except for the difference listed above, you may try out, with the trial version, all the same functions as the commercial version.

Return to top

Caution

Be aware of the following points listed below.

  • The copyright for this software is held by Panasonic Industrial Devices SUNX Co., Ltd. By using this software it is assumed that you agree to "Conditions of Use" presented below.
  • The trial version of Control FPWIN Pro is provided so that you can try out the functions of the commercial version.
    Be aware that no support is provided and no warranty whatsoever is offered to users of the trial version.
    (The help menu provides tips for program operations.)
  • Do not use the trial version of Control FPWIN Pro in the actual operation of devices.
    Furthermore, if you ignore this warning and the program that you have provided using the trial version of Control FPWIN Pro causes the equipment to malfunction, this company accepts absolutely no responsibility for any loss or damage incurred. If you want to use Control FPWIN Pro to provide programs for practical use in equipment, please purchase the commercial version of Control FPWIN Pro.

Conditions of Use

  • Panasonic Industrial Devices SUNX does not warrant anything regarding the use of this software.
  • Panasonic Industrial Devices SUNX will not assume responsibility of any sort for direct, indirect, repercussive, resulting or special damage that results from using this software or from the operation of the software itself.

System Requirements

Make sure that the computer on which you intend to run the software meets the minimum specifications listed below.

OS Windows 95 (OSR2) / 98/ Me / NT (Ver.4.0 or later) / 2000 / XP
Available hard disk space More than 100 MB
Recommended CPU Pentium 100 MHz or better
Recommended system RAM More than 128 MB (depends on OS)
Recommended display resolution 1024*768 or more
Recommended color depth High color (16 bits) or better
Applicable PLCs All FP series (without FP7)

How to Install

1.Click on the title of the file name (listed below) that you want to download and indicate the download destination.

*When you already have indicated the download destination, the file will be downloaded automatically.

Title Language Version File size Update
fpwin_pro_demov524e.exe EN 5.24 105.0MB October 25, 2007

2.When the download is finished, double-click the file to begin the installation process.

  • During installation be sure to read the License Agreement. Users who continue with the installation are regarded as assenting to the conditions of use in the License Agreement.
  • There is no need to input a serial number during the installation of the trial version.
　

3.After completing the installation, reboot the computer.

　
 

Close

Return to top